Rhomboid prism can displace a laser beam without change the image orientation, the input beam is totally internal reflected by two 45degree faces and goes out from the output face. Then, a lateral displacement is produced. Higher transmission rate can be achieved by anti-reflective coating on the input and output faces. Rhomboid prism is always used in stereoscopic system and periscope system. Currently we can make angle tolerance<5 arc seconds, total beam deviation<30 arc seconds. Large size is also available.
| Parameter | Standard Specification |
| Material | Optical glasses, Fused Silica, Corning 7980, CaF2, BaF2, MgF2, Silicon,Germanium, ZnSe |
| Dimension | 3 ~ 300mm |
| Dimension tolerance | +/-0.01 ~ +/-0.2mm |
| Surface quality | 10-5 ~ 80-50 |
| Angle Tolerance | 90。+/-1”, others+/-30”~+/-3’ |
| Parallelism | <3 arc minutes |
| Flatness(in 25mm area) | N=0.5, ∆N=0.1 |
| Clear Aperture | >90% |
| Chamfer | 0.3mm@45 degree |
| Coating | AR coating, Reflection coating, Splitter coating etc. |
| * Remark：Customized is available | |
